Description:
About this item:
Unlock Clamping Confidence: Achieve Precision and Efficiency
Introducing the Bench Dog Clamp Set by POWERTEC.
Tired of fumbling with cumbersome clamps and struggling to secure your workpieces? These Bench Dog Clamps are your solution for effortless and reliable clamping, transforming your woodworking projects from frustrating to flawless.
Effortless Clamping Power: Designed for 3/4" bench dog holes, these horizontal clamps provide a secure hold on workpieces up to 1-3/16" thick. Quickly secure and release your projects with the easy-to-operate design, while the adjustable opening accommodates various workpiece sizes.
Unwavering Stability for Precision Work: Exerting a clamping force of up to 176lbs, these bench dog clamps keep your workpieces firmly in place, preventing shifting and ensuring accurate cuts, sanding, carving, and drilling. Enhance stability and achieve professional-level precision in every project.
Versatile and Compatible: These clamps seamlessly integrate with a wide range of bench dog accessories, including bench cookies and other clamps, making them ideal for use with various workbenches. Whether you're a seasoned woodworker or a DIY enthusiast, these clamps are essential additions to your workshop.
Built to Last: Crafted from high-strength nylon, these bench dog clamps are engineered to withstand the rigors of woodworking. Enjoy reliable performance and long-lasting durability for all your clamping needs.
POWERTEC is a leading manufacturer of high quality woodworking and construction tools, accessories, machines, and an assortment of OEM replacement parts. We are committed to exceeding expectations, while bringing the latest innovations, technology, and product development to the industry.
Review:
4.6 out of 5
92.31% of customers are satisfied
5.0 out of 5 stars Work well on a table with 20 mm holes
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } I use these on a table setup on the parf system with 20 mm holes. They are a touch loose since these are for 3/4” holes, but once I put the included clamp knobs on they perform beautifully. I used them to hold 2”+ slabs while I sand them and cut them to final dimensions. The clamps have just enough pressure to hold the slabs and then allow quick release and adjustment for the next slab which was not the same dimensions as the previous. Glad I picked some up.
4.0 out of 5 stars Just okay
Hard to use and tighten from underneath. Sent back. Love their bench dogs. Those are great
5.0 out of 5 stars Easy to use.
These are easy to use and do a great job holding projects in place on my workbench. I use them to sand, chisel and to secure wood for applying epoxy.
3.0 out of 5 stars Almost really good.
I have only played these clamps to see how well they work. They will hold your work piece firmly, and at least for my bench, I do not need the screws from below to make them work. I like the rubber pads and how easily they lock in place. BUT...The screw/knobs provided are too short for my bench (about 1-3/4" thick). I suppose they will work with a bunch uptown about 1-5/16" thick. Sadly, the knobs are attached to the screws in a manner that precludes the screws from being replaced with longer ones. Also, all the various knob/screw combos I have around are either 1/4-20 or 5/16-18. These are M8-1.25 screws. Ugh.As I said they hold firmly without the knob/screw, but I think that is leading to the workpiece being slightly lifted off the bench when the clamp is tightened. Maybe 1/16-1/8" or so. I'm not sure as I don't have any M8 screws around to test things out.So, if your bench is under 1-5/16" thick, I think these are great. If it's thicker, you need to think what your options are. I like these well enough that I'm going to pick up some M8 screws and 3D print some knobs to use with them.I debated about whether to give 3 or 4 stars for this. If the screws had been long enough, it would have been 5, but the fact they are not makes it 4, and the fact they can easily be modify drops it to 3. Sorry.
5.0 out of 5 stars Works great
These are pretty impressive. Fit tighly in 3/4" round holes in my Hoffman and Hammer bench, the side wire "spring" is very strong, (maybe a bit too strong?). You can buy a bunch of wooden dowels and make your own for less $, but I only needed 2, so for around $5 each, I couldn't beat that. They can get stuck in the holes if pushed in deep, and they are quite short, so pushing them back out from under the bench is a bit of a pain. I found grabbing the protruding end with a rubber coated needle nose works well to extract, or prying them up with a flat head screw driver on the flat waffle-face works well.
5.0 out of 5 stars Great products at great prices.
I just created a new fancy spoil board for my PrintNC CNC machine. I made the 19mm holes in Fusion360 19.05mm. The measured dimension after manufacture was 18.80mm these Powertec clamps are a perfect fit.
4.0 out of 5 stars Works
Works as advertised
5.0 out of 5 stars 100%
Work like a charm. I like the plastic for the blade safety. We do a LOT of hand planing. If a mistake can be made to tear up something, we can do that !! Plastic is.....well, plastic.Good Value
Handy Size and good value
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } Nice compact size and lightweight with ample strength. More convenient to have in easy reach than the biggger heavy brass ones and much more affordable to keep several of them around.
Quality product
These are good quality and will do a great job.
Gute Hilfen
Habe ich für meinen Selbstgebauten Arbeitstische gekauft. Tun ihren Zweck und halten gut. Ich nutze sie zum Anlegen der Schienen für meine Tauchkreissäge. Sehr hilfreich.
Material de calidad
El aluminio es muy resistente. Adecuado al precio
Very Happy with the Product
works great with the Vice
Visit the POWERTEC Store
POWERTEC Bench Dog Clamps for 3/4" Dog Holes, Quick Release and Heavy Duty Workbench Clamps with 176lbs Clamping Force, Woodworking Tools - 2PCs (72105)
BHD24452
Quantity:
Order today to get by
Free delivery on orders over BHD 20
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
Similar suggestions by Bolo
More from this brand
Similar items from “Bench Clamps”
Share with
Or share with link
https://www.bolo.bh/products/UO0QXA4WSFC