5.0 out of 5 stars Game Changer for the Saturn 4 Ultra

K. · June 16, 2025

(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } Anyone who has resin printed knows that cleanup can be a major drawback with most resin prints. This device makes it literally "push-button" simple to clean and cure prints. The build plate fits directly in the rack so you can do a full cleaning cycle before even removing objects from the build plate. I bought an additional cleaning container (sold separately) so I could have one for water washable and one for IPA. This is easy to use and works wonderfully to make highly detailed prints with very little mess or extra cleanup.

5.0 out of 5 stars Game Changer!

F. · January 3, 2023

Huge game changer to my work flow. I didn't realize how much this would streamline my print processing! I was formerly pouring IPA into a beaker and washing all my parts by hand and was using the Elegoo Mercury for curing. I was treated to a gift card for Christmas and decided to go for this washing station and man, I'm glad I did. Aside from having a workstation that is less cluttered with "stuff" to process my prints, the ability to have a giant container with a parts basket that can be stored inside the curing station is really nice! Also, I LOVE the ability to take my build plate off the printer and be able to hang it in the washing basket and wash my print right on the build plate! It gives me time while the part is washing to drain the vat and strain the resin back into the bottle while the print is going and I don't have to worry about drips from the build plate falling on to the LCD. By the time I'm done straining the residual resin, the wash is complete and I can pop my build off the build plate, wipe the build plate down and immediately start printing again.My only beef with this device is that when you put the curing stand on the machine, be extra careful that you change the mode from wash to cure. It will not automatically switch the mode and if you press start with the intention to cure your piece but it's still in wash mode, the curing plate will spin at the speed of light and fling your new print into the dome of the curing station. It has the ability to detect whether or not the lid is on and will not let you shine UV light in your eyeballs if the lid is not in place, but it won't automatically detect that the wash container has been removed and you HAVE to be sure that the mode is correct. All in all though, other than that, this thing is amazing and I'm really happy to have it in the lineup.Pros:1. Convenient, stores nice, reduces clutter on my workbench2. Built plate can be placed directly inside the washing rack for delicate parts3. Stores a lot of IPA and reduces the time I am pouring it back and forth from a storage container to a washing container. Also less IPA splashes up at me when I'm processing since it's all contained in this machine.4. Washing container. has a locking lid to prevent evaporation of IPA5. Easy touch screen controls and easy to read LCD display6. safety mechanism to prevent UV light from turning on if the lid is off so you don't blast your eyeballs with UV light7. Asthetically looks good with the same form as the printer itselfCons:1. MAKE EXTRA SURE THAT YOU HAVE SET THE MODE TO CURE WHEN YOU'RE READY TO CURE OR YOUR MODEL WILL BE HURLED AT MACH 1 AT THE SIDE OF THE DOME AND SCARE THE C R A P OUT OF YOU!2. Not really a huge con, but would be nice if there was a storage nook or something to store the curing platform when not in use. I might have to design and print something to keep it nearby and out of the way!I held off for a long time from buying this because I would rather spend my money on more resin BUT in the long run this product will streamline your post print processing and perhaps even save you from having to buy IPA as frequently since there is less waste. I really like this machine and would recommend it without reservation to anyone who was looking at this or for a away to simplify your workflow!

5.0 out of 5 stars a MUST have with your resin printer

R. · May 8, 2025

This is an absolute must have for anyone with a resin printer. Doesn't over-cure,fairly gentle wash, nice product thanks again Elegoo!

5.0 out of 5 stars Super

F.A.M.m. · May 20, 2025

Excelente producto

4.0 out of 5 stars Makes Cleanup much easier...with a cost

D. · September 13, 2023

I use my ELEGOO wash station nearly everyday. It is undeniable that it has tremendously improved my 3D printing process and cleanup. The bucket itself holds a generous amount of IPA and could fit almost anything I print on my ELEGOO Mars 2 Pro (certainly a large batch of miniatures. That being said, there are 2 issues I've had with this setup both having to do with the washing process (the curing is great).After many uses, (maybe 2 years of on and off use) the snaps on the lid on the bucket start to loosen more and more until they crack. ELEGOO does NOT sell replacement buckets which means I would have to buy an entirely new station in order to replace the bucket. I've opted to glue the cracks and use a bit of tape to keep the snaps secure, but this is unfortunate.Secondly, when washing, sometimes the magnetic spinner disconnects from the spinning part in the bucket and stops swishing around the liquid. This is a very minor inconvenience as during washing it will often reconnect but this means I set the washing timer for longer than usual to account for time that the IPA is not swishing.Overall, this is a useful and timesaving product. I think it's safer, more compact, has more space, and is higher quality than an ultrasonic cleaner alone.

5.0 out of 5 stars Easy set up. Easy manual. Ready to go in 10 min

r. · April 10, 2025

Easy set up. Easy manual. Ready to go in 10 min

5.0 out of 5 stars Amputee friendly. Easy to press with foot

A. · April 3, 2025

Good size- my foot for scale. Easy to use for double amputee

5.0 out of 5 stars Effective Setup for Resin 3D Print Cleaning and Curing

J.F. · March 12, 2025

This setup has been excellent for our resin 3D prints. While it takes some time to get accustomed to the process, we've been very satisfied with the results.

Buena para el costo

J.J.C. · February 19, 2024

(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } Llevo poco usándola pero lo hace bien. No me gusta mucho como programas el tiempo y las funciones pero el precio está bien.

Siencieux, prope j aime ça

L.C.V. · May 9, 2025

Function très bien

Excellent for resin washing and curing

A. · February 23, 2024

This is a must for all resin printing hobbyists. The good thing about this bundle is that it comes withh two separate motor units for washing and curing. You can buy an extra container for $39/- for rinsing in two stages. Perfect washing and curing station.

De maravilla

J. · July 7, 2022

Super fácil de usar, no da ningún problema para nada, y muy intuitiva