5.0 out of 5 stars Reliable

w. · May 16, 2025

(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } One of the best 3d printers I've used. Other 3d printers have given me plenty of issues such as having to replace parts but this one I've had for about a year now and I've had no problems.

5.0 out of 5 stars Good starter printer

D. · April 24, 2025

I'm very happy with this printer. It's smaller than I thought it would be but I adjusted as I went forward... one thing I wish I knew is that the VAT can only be fully replaced you can not replace the FEP itself you need a whole setup. Regardless this is a good beginner printer

4.0 out of 5 stars Great resin printer

J. · March 6, 2025

I really like this printer. Definitely an upgrade from the photon and photon 2 I was using. I really like the build plate although you will need to be careful not to chip or damage it when using a metal scraper to remove prints. The bed levels pretty easy (just like most other resin printers) and it even comes with a screen protector.As for print quality, heat transfer, bed warping, print speed and the rest of the things one might want to know about. You will need to play with your settings and adjust them for each type of resin. But I can’t say how your prints will come out since I’m not slicing them. However, I can say my parts have come out pretty good in most cases. I will say if you’re going from a filament printer to a resin printer, the resin printers can make stuff faster but you will need to use supports much more often and the prints are typically more brittle (depending on the resin but in most cases it will be more brittle) but you can make parts with much more fine detail than possible with FDM printing.The picture is of a blade I made for a trainer butterfly knife. I sliced it pretty small to get that result but it was worth it and it was a ridiculously big time difference. I may not use my resin printers first for most things but when I need fine details or smooth surfaces, this printer has been the GOAT for that work.Side note; the Saran Wrap on the screen is just a barrier to keep resin off the screen just in case a vat leaks or whatever. It does come with screen protectors but I messed up and put a small chip on the edge of my build plate and it left a bit just long and sharp enough to pierce the vat film. I took the screen protector off since the resin on it was stuck but have been using Saran Wrap since as a protective barrier. I take a tiny bit of 91% isopropyl alcohol and apply it to the screen with a lint green towel to clean it off and while there is a bit of the IPA left, I’ll apply the Saran Wrap and it will help me make it perfectly flat and free of wrinkles and air bubbles. It’s been a good little trick I use on all 3 of my resin printers now since even if I accidentally spill or drip resin, all I have to do is cut the contaminated wrap off and put some new on.Now I want to add a little disclaimer to the last paragraph, I’m not expert but I am someone that has been in the 3D printing hobby for about 5 years and with about 5 figures worth of machines, tools, accessories and consumables invested into it. I am only saying that this has worked for me, not if it’s the best solution or even a good solution. I know someone will most likely say something valid on why my Saran Wrap idea may not be a good idea so I will say do your own research first before trying anything some random person on the internet says.

5.0 out of 5 stars Easy to use

m.y. · May 12, 2025

Been very happy with this item been using it since I got it incredibly easy to use

5.0 out of 5 stars Calidad

j. · May 13, 2025

Buena impresora

1.0 out of 5 stars 2 broken ones back to back, total garbage

J.J.B. · April 28, 2025

I bought this and ran it for four days with maybe 3 out of 10 succesful prints. I had various failures for different reasons mainly related to software. I finally got it dialed in and then suddenly, I had a massive prinet failure, I reset everything, same failure. After a complete rundown, I fugured out that the screen was broken after 4 days! I am right in the middle of a project and could get a replacement 2 days later, so I ordered another while I returned the original. Four day later, another broken screen! Literally no excuse for this.

5.0 out of 5 stars Great beginner resin printer

W.B. · February 20, 2025

Liked:I liked the easy setup and high resolution. It prints fast - about twice as fast as my current 4k printer. The print size is large enough to accommodate most prints you'd want, while not being so large that it takes an entire bottle of resin to get to a good level. The bed is very easy to level and feels more secure than my Elegoo Mars 3 with four points to tighten rather than just two. If you have a print where a piece fell off, it give you an option after each print to clean the vat - I love that!Disliked:It feels a little cheap. Very lightweight and the cover is an almost flexible plastic. But, they had to get that price down somehow, am I right? Neither of these things affect print quality, o they don't bother me much.I will probably order another so I can print more, faster.

3.0 out of 5 stars Just get the Ultra version!

A. · April 4, 2025

I tried and returned this model twice, after working to get good prints. I have had well over 20 3D resin printers since the Wanhao and Form 1, and a lot of experience with tuning and optimizing each new model. I thought the fails with the first were just a lemon, but similar with the second. I got up courage to try the Ultra, put on the flex plate and sensor extension, attached the reptile heater pad to the upright, changed the vat to nFEP, and it has been amazing ... and fast. BTW, the ACF vat is also great. The only challenges are that after leveling, the printer 'detects' residue (which there isn't), and has to be 'OK'd', and the protective screen cover they send isn't as good as the one for the Photon Mono 2pro ... but otherwise I am very happy and gladly recommend along with the M*rs 4. Very happy with the Photon Mono 4 Ultra for a few $$ more.

Asesoria

R. · March 24, 2025

(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } Hola buen día, adquirí este producto con ustedes, me gustaría que me dieran orientación ya que la impresora no reconoce los archivos de la usb que agregue para imprimir, si reconoce y ya imprimí los archivos muestra que traía la usbMuchas gracias

Muy buen producto

R.P. · December 28, 2024

Me gustó mucho, la calidad y velocidad son muy buenas, solo encontré dos pequeños detalles: primero la plancha de impresión es muy buena, solo que el grabado que tiene hace que las piezas se adieran de más y es muy difícil desprenderlas, el grabado se raya al momento de despegar las piezas. Y segundo, hay muy pocos slycers gratuitos que tengan una configuración para mono 4, tengo que hacer 2 o 3 configuraciones fuera del programa en que que termino seccionando las piezas. Pero en general un buen producto.