
Description:
About this item:
Review:
4.9 out of 5
98.00% of customers are satisfied
5.0 out of 5 stars Secure, sturdy, and super convenient
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } I didn't like the phone holders with the suction cups since more times than not, they eventually fall off the glass or dashboard. Just wanted something that would hold my phone in both portrait and landscape orientation and wouldn't jiggle loose or fall off while I'm driving.This particular holder works very well, secures the phone well by means of collapsing/tightening arms (spring loaded I believe), and hasn't fallen out of the vent yet (Iphone 13 Pro Max with Case). Basically, you just set your phone and then squeeze the arms together (you'll hear/feel the clicks as it tightens). To release the arms and free the phone, there's a little quick-release button on the back side and the arms retract instantly.I've been very happy with the sturdiness of the holder because it's lightweight plastic and I thought I might have issues in the cold with it cracking. But I've had it for a while now and it's held up.When your phone is in the holder, be aware that you will block the vent air flow, but in the summertime, this is actually a benefit to keep the phone cool while using it, since the vent blows right on the back of the phone.Installation is super easy, just hook it in and tighten the nut and you're good to go. The instructions are clear and no tools are needed.Any phone holder of this level is going to have some vibration issues if you drive on bumpy or uneven surfaces. I barely notice when on paved roads and even at higher speeds. My car does shake a bit (it's older) when I reach higher speeds, but I've been very satisfied with the lack of vibration.As mentioned above, due to the design of this, it's quite versatile and you can swap from portrait to landscape orientation with the flick of a wrist by rotating it 90 degrees.Definitely worth the money and performs much better than others in the same price class that I've used in the past. I would recommend this to anyone wanting a simple solution to holding their phones in the car.
5.0 out of 5 stars Everyone should have this in their car!!
For only $20 (and I got it on sale for $13), this is an incredible product!! I’ve been using it for about a week now. It is very sturdy compared to other phone holders I’ve tried for my car. It doesn’t wiggle at all with a heavy phone on it!It has 2 little hooks on the end. You twist a little piece in the middle and that moves the hooks in and out to make it really tight on the car vent. Then it has a very tight ball and socket which is what allows you to move the holder to a good location for seeing while driving. I live where there are a lot of potholes, bumps, and curves on the roads, and it has never moved! You do have to put that ball and socket joint together when you receive the product, but it’s really easy. I didn’t even have to look at the instructions.I would 100% recommend this product!!
4.0 out of 5 stars Works as Described. A Matter of Preference
Fit my 2018 Honda CR-V.The upside:1. the fit is secure and tight and I have not experienced any shaking/vibrating issues2. the phone is in view without having to take your eyes off the road3. the phone release works smoothly4. easy to installThe down sides to this arrangement are:1. the vent is stuck in place. It cannot be moved up/down (but can still be moved side to side)2. it is difficult to do anything more than a few quick taps on the phone. It is not in a position to do any sort of texting or other searching (whether or not you should do that is another issue) while the phone is in the holder3. I wish the actual phone holder was a little bit longer as I have a larger sized phone (but it is still functional)4. you need a little patience to remove the holder from the vent (on those occasions where you have a reason to remove). The hooks need to be maneuvered to clear from the back of the vent fin.Overall, I prefer this arrangement over the cup holder type, especially since my state has cracked down on texting while driving!This product is highly recommended.
5.0 out of 5 stars It’s perfect
It’s perfect. Instead of having a rubber slit that slides into the vent, it tightens with a retractable hook so it’s very sturdy and will stay attached even on a bumpy road. I like that it’s not a suction cup so there’s no risk of it melting on your windshield if it gets hot.It has a ball-and-socket for adjusting the angle of the phone, not sure if it will eventually wear out but it seems very secure and able to support a heavy phone.The adjustable clamp is secure and is able to handle a wide range of phone sizes. It’s even cushioned so it won’t be rattling around when driving.Finally (admittedly not important), I like how it feels to tighten and release the phone. It’s just smooth and satisfying. You don’t need to look anywhere else for a phone holder.
5.0 out of 5 stars EASY TO INSTALL, STURDY, EASY TO REMOVE PHONE FROM THE CARRIER. A+++ Rating from me
I purchased this item because I had a suction cup phone holder, but it NEVER STAYED ON. If I took a quick turn, it flew off the dash. I finally ordered this item!The phone holder is quite sturdy, but not too heavy. It came with instructions and it was VERY EASY TO INSTALL. I HAVE HAD IT ON FOR A FEW DAYS AND IT IS STONG AND HASN'T BUDGED. IT CRADLES MY PHONE VERY WELL AND IT IS EASY TO RETRIEVE MY PHONE FROM THE CARRIER. THERE IS AN ACCESSIBLE BUTTON TO GET YOUR PHONE OFF THE CARRIER.I’M EXTREMELY HAPPY WITH THIS ITEM AND RECOMMEND IT FOR THOSE WHO ARE TIRED OF THEIR SUCTION CUP FAILING. GREAT PURCHASE AND YOU WILL BE HAPPY TO BUY IT AS WELL. A++++
جودة عالية
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } يفي بالغرض
Works great for cars but not trucks
Good but had to put it in my wife's car as the connector is too short for deep truck air fins
Eine gute Alternative
Der Halter ist klasse und tut was er soll.Die Stabilität gut.
Bom
Cumpre muito bem com a função.
Good quality
Very well made product. Very practical.
Visit the Miracase Store
Miracase Phone Holders for Your Car with Metal Hook Clip, Air Vent Cell Phone Stand Car Mount, Universal Automobile Cradle Fit for iPhone Android and All Smartphones, Dark Black
BHD8369






Quantity:
Order today to get by
Free delivery on orders over BHD 20
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
Similar suggestions by Bolo
More from this brand
Similar items from “Cradles”
Share with
Or share with link
https://www.bolo.bh/products/UO0PULOXDCZ