5.0 out of 5 stars Great price for what you get

r.p.r. · June 2, 2025

(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } It is a reliable filament for a reliable price. It was an evolution in settling down on a brand, but no regrets here. I have had some better and some worse, but this is something that I can always count on. I now how it will behave from season to season. I know if the house humidity is over 35 percent, I am going to dry it to print it. I am ok with that idea. It stores well enough. roll to roll, the color stays pretty close. I have good bed adhesion, then it comes off the bed when you want it too. Unless I need some real exotic color, Elegoo is how I roll. I bet out of 50 rolls, I have only had one where I thought it had a tangle in the factory winding of the spool. I still trust the spool to go off and let it print without problems. The silks can be a bit brittle coming off the spool, but take your time and avoid sharp bends when loading, and then I think you will be fine. Unless I am used to it, the PLA does not smell at all when printing. I have sat in the same room as the printer for a year and half now and not growing any weird body parts. I am happy with the price over quality.

5.0 out of 5 stars Great *everything* PLA filament.

E.T. · June 16, 2025

I've been using Elegoo PLA+ for about a year now as my main PLA. It's been very consistent for me. Out of 50+ rolls, I've never had a problem with it. I'm using it primarily on a Neptune 4. The flowrate is similar enough between different colors that you probably don't have to run calibrations. I run them on every roll of every filament I get though. If you want flawless prints, you have to do the work.You have to do some testing to see how fast you can print specific models with overhang, bridging, etc. The best results I get are somewhere around 250mm/sec on complex models.I've used it through .4 and .6 nozzles with no issues. If you plan on using it with a hardened steel nozzle, bump up the nozzle temp. It prints fine though.I would easily recommend Elegoo's PLA+ to anyone looking for a solid PLA+ at a good price point. It's a basic filament that does a great job in basic colors.

5.0 out of 5 stars Excellent Quality at an Affordable Price Point

L.J.G.I. · February 7, 2025

The ELEGOO PLA Plus (PLA+) Filament Bundle stands out for its enhanced strength and toughness. Unlike standard PLA, this premium-grade filament exhibits significant robustness and reduced fragility. It demonstrates properties similar to ABS, allowing for reliable printing without needing a heated enclosure. This enhanced toughness also contributes to excellent impact resistance, making it highly resilient against drops and stress, which is particularly important for functional prints and intricate mechanical components.In terms of printability, the filament is compatible with a wide range of 3D printers and requires minimal adjustments to achieve optimal results. Its low shrinkage and reduced tendency to warp ensure reliable first-layer adhesion, which leads to successful print outcomes. Moreover, the dimensional accuracy of ±0.02mm guarantees that users can expect consistent output, thanks to the filament's stable diameter. This precision decreases the likelihood of nozzle clogging, making it an excellent choice for high-detail models and intricate precision prints.Visually, the filament bundle offers vibrant colors such as Orange, Yellow, Sea Green, and Sky Blue, each characterized by rich saturation that enhances the aesthetic appeal of printed creations. The matte finish notably diminishes the visibility of layer lines, further improving the overall appearance of the finished product.Each spool arrives in meticulous packaging that prevents tangling and extrusion complications. The vacuum-sealed environment protects the filament from moisture, preserving its quality until it is ready for use.However, users should be aware of a few disadvantages. The printing temperature for this filament is higher than that of standard PLA, operating between 200-220°C compared to traditional PLA's 190°C. This may necessitate adjustments to printer settings. Additionally, while the filament surpasses standard PLA in toughness, it lacks the flexibility offered by materials like TPU or Nylon, making it less suitable for applications that require bendable properties. Currently, the color options are somewhat limited, so users looking for classic colors like black or white may need to settle for what's available. Finally, some users have encountered minor stringing issues, which can be resolved with careful adjustments to retraction settings.In conclusion, the ELEGOO PLA+ Filament Bundle is an exceptional choice for those seeking strong, reliable, and visually captivating prints. With remarkable toughness, ease of use, and vibrant matte colors, it is a prime option for functional and artistic applications. Although minor challenges exist, such as higher printing temperatures and the need for adjustments to prevent stringing, its unmatched durability and precision make it highly recommended for hobbyists, professionals, and makers alike.

5.0 out of 5 stars Great product, runs very smooth, good price

T.G. · June 8, 2025

I was finishing up a spool of another brand and half way through it switched to the Elegoo and the results were outstanding (In the pics, you can clearly see where). I won't mention the other brand as honestly I'm fine with it and I'm sure with some different settings it would run just as good. But the Elegoo is running flawlessly on my K2 Plus with default profiles. It is printing so smooth you can barely see the print lines. I've run 5 spools so far and have had really good results.

5.0 out of 5 stars The Spool Be Spoolin Mane.

D.W. · May 15, 2025

It's spool. I bought it, it worked, it was packaged nicely, and each spool was sealed still, as it should be. It prints just like all my other spool. No adhesion issues with the blue, and I've printed about 400G of it since it arrived 24 hours ago. Feels solid, looks exactly as advertised, and feels pretty good once completed. Will definitely be ordering more from here. I appreciate it just wasn't the standard "Red, Blue, White, Black", but a little variety. I wish I could find Glow In the Dark packages like this, with 4x1KG.

Awesome

A.C. · March 15, 2025

(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } Very nice product

Calidad

D.s. · April 30, 2025

Filamento de excelente calidad.

PLA+ is better than PLA

P. · March 25, 2025

PLA+ is much better than PLA.Its filament does not break while hanging if left for a week or month.best product.

Nice

D. · June 11, 2025

Nice

Doesn't seem like genuine product.

A.C. · April 23, 2025

Spool did not come as shown. Was on a generic plastic spool with no label. It's also badly wound and keeps getting stuck. I doubt it's original Elegoo. Buyer beware.