Description:
Keep interior wood projects looking beautiful with Minwax Polycrylic Protective Finish Spray. This crystal clear protective finish protects and adds beauty to woodwork, furniture, and more. The clear top coat protects against scratches, scuffs and blemishes to protect the wood surface beneath. This clear sealer dries crystal clear and stays crystal clear, making it ideal for use over all Minwax Oil-Based and Water-Based Stains and colors, as well as all wood species including light woods like maple, ash and birch. The ultra-fast-drying protective spray coating allows for quick recoats and is also easy to clean-up the clear wood finish with just soap and water. This protective wood top coat not only protects the natural beauty of the wood, but offers an attractive, classic sheen for a modern and subtle look. It’s non-yellowing, non-ambering and low odor to protect your wood and provide lasting protection to your project. Application:
1. Surface must be dry and free of wax, grease, polish, any foreign matter or old finishes in poor condition.
2. Sand to a smooth, uniform surface. DO NOT USE STEEL WOOL. Remove dust with a damp cloth. Let dry completely.
3. If desired, apply stain such as Minwax Water Based Wood Stain or Minwax Wood Finish stain to bare wood surfaces following label directions. Wait at least 24 hours before applying Polycrylic Finish Spray over Minwax Wood Finish Stain.
4. Shake can vigorously for two minutes. Repeat for ten seconds after each minute of use.
5. Protect adjacent areas from overspray. Hold can vertically 12” from surface and depress button fully. Spray using an even, sweeping motion with slightly overlapping strokes. On unfinished wood, apply sufficient material to seal, open joints, edges and end-grain.
6. Apply a thin coat of Polycrylic Finish Spray to avoid runs and sags.
7. Let dry at least 30 minutes between coats, then sand with very fine sandpaper (220 grit) to ensure an even finish and proper adhesion of additional coats. Remove all dust.
8. Apply a second coat. For additional coats, repeat Step 7 before applying. Three coats are recommended.
9. After final coat, allow 1 hour before light handling and 24 hours before normal use.
From the Manufacturer
A hard crystal clear, ultra fast-drying protective finish.
Details:
Visit the Minwax Store
Minwax 33333000 Polycrylic Protective Finish Spray for Wood, Clear Satin, 11.5 oz. Aerosol Can
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
Every product in the BOLO catalogue is sourced through our Verified Global Supply Network of verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of Bahrain. Any items found to be restricted or prohibited for sale within the Bahrain will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in Bahrain are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
Share with
Or share with link
https://www.bolo.bh/products/UO004OCMI4N
Visit the Minwax Store
Minwax 33333000 Polycrylic Protective Finish Spray for Wood, Clear Satin, 11.5 oz. Aerosol Can
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
Every product in the BOLO catalogue is sourced through our Verified Global Supply Network of verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of Bahrain. Any items found to be restricted or prohibited for sale within the Bahrain will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in Bahrain are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Keep interior wood projects looking beautiful with Minwax Polycrylic Protective Finish Spray. This crystal clear protective finish protects and adds beauty to woodwork, furniture, and more. The clear top coat protects against scratches, scuffs and blemishes to protect the wood surface beneath. This clear sealer dries crystal clear and stays crystal clear, making it ideal for use over all Minwax Oil-Based and Water-Based Stains and colors, as well as all wood species including light woods like maple, ash and birch. The ultra-fast-drying protective spray coating allows for quick recoats and is also easy to clean-up the clear wood finish with just soap and water. This protective wood top coat not only protects the natural beauty of the wood, but offers an attractive, classic sheen for a modern and subtle look. It’s non-yellowing, non-ambering and low odor to protect your wood and provide lasting protection to your project. Application:
1. Surface must be dry and free of wax, grease, polish, any foreign matter or old finishes in poor condition.
2. Sand to a smooth, uniform surface. DO NOT USE STEEL WOOL. Remove dust with a damp cloth. Let dry completely.
3. If desired, apply stain such as Minwax Water Based Wood Stain or Minwax Wood Finish stain to bare wood surfaces following label directions. Wait at least 24 hours before applying Polycrylic Finish Spray over Minwax Wood Finish Stain.
4. Shake can vigorously for two minutes. Repeat for ten seconds after each minute of use.
5. Protect adjacent areas from overspray. Hold can vertically 12” from surface and depress button fully. Spray using an even, sweeping motion with slightly overlapping strokes. On unfinished wood, apply sufficient material to seal, open joints, edges and end-grain.
6. Apply a thin coat of Polycrylic Finish Spray to avoid runs and sags.
7. Let dry at least 30 minutes between coats, then sand with very fine sandpaper (220 grit) to ensure an even finish and proper adhesion of additional coats. Remove all dust.
8. Apply a second coat. For additional coats, repeat Step 7 before applying. Three coats are recommended.
9. After final coat, allow 1 hour before light handling and 24 hours before normal use.
From the Manufacturer
A hard crystal clear, ultra fast-drying protective finish.
Details:
Similar suggestions by Bolo
Share with
Or share with link
https://www.bolo.bh/products/UO004OCMI4N