5.0 out of 5 stars Great value for money

R.S. · 8 May 2025

(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } A great intro into this hobby. Creates good prints with little effort. Great value for money.

5.0 out of 5 stars When it stops printing

M. · 15 May 2025

Very good printer just remember to check the screws are still tight on upright on the sides after a lot of printing because thay do come loos after time

4.0 out of 5 stars Eventually Brilliant

A.D.H. · 19 April 2025

I'm new to 3D printing, so bought a highly regarded printer to make the introduction easy.The quick start guide gets the printer put together, a basic setup operation, and printing of a provided, very forgiving model.When I tried to print other models, it was fail after fail. The instructions were totally inadequate and I learned much from online videos, of which there are plenty. Following these tips, my printing has dramatically improved as has my confidence in leaving the printer to get on with the job. It can be a slow process and watching the model slowly appear is hypnotic. Be careful or you will lose a lot of time.I certainly recommend this printer, but do your research on video sites so that you are able to set it up and run it properly. It is a brilliant machine, but it took me a long time to get there.

5.0 out of 5 stars Amazing printer

l.a. · 23 November 2024

What a fantastic item this has turned out to be, allows creating of detailed and intricate pieces, very easy to set up, intuitive settings for printing. Overall great bit of kit

5.0 out of 5 stars 10/10 Great Printer

p.w. · 4 February 2024

The media could not be loaded. After nearly four years of almost continuous use my Ender 3v2 died.Looking around and talking to friends I found this Ender 3v3 se. I have always been a bit dubious about printers that self level. Not really sure that could do the job properly. Reading online I see that reviews have always been fairly mixed.My experience with this printer though is 100% perfect. It took about 15 minutes to get the machine from its box, set up and printing. The cat in the photos was produced in just over an hour.Amazing quality, speed and ease and use. Absolutely love it!If you are looking for a new 3d filament print you cannot go wrong with this model.

1.0 out of 5 stars Did not work.. - 10

S. · 13 February 2025

This is the second one of these that I've bought. The first spent more time being returned and back to the supplier than on my desk. I gave up in the end, and ordered a new one. This did nothing but crash the print head into the print bed making a horrible noise. It wouldn't even get to the bed levelling stage. I've contacted the ‎Crealty helpline... No response. Perhaps others have had better experiences, but in my experience this item is not only frustrating, but a complete waste of time and money.

5.0 out of 5 stars Great starter 3d printer.

A.C. · 27 December 2024

Great printer, easy to assemble and to start printing less than 20 mins out of the box. Highly recommend.

5.0 out of 5 stars Printer

T.R. · 25 April 2025

Wonderful thank you

Highly Recommend Upgrading!!

A.L. · 26 June 2023

(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } I highly recommend this upgrade as I noticed that my stock extruder was "on its way out."While the extruder was not completely broken, it was cracked.Glad I did the upgrade when I did it because I did not notice it initially. The springs and thehand wheels were also a nice upgrade as the quality was superior to the "stock parts."I recommend planning out your printer upgrades in advance in its complete form, as this will save you time and would reduce your time "tinkering" and increase the time you're printing.

Printed great right out of the box

O.B. · 15 May 2025

I needed gray for a project and misjudged the amount I still had in stock. This filament came in and went straight into my printer. I have since printed +8 hours with no issues.

Perfect

R.r. · 28 June 2024

Zeer goede hechting de top

Superior to Brass Nozzles

G.S. · 18 November 2023

Creality High Speed Nozzle Kit: A Must-Have Upgrade for Enhanced Printing PerformanceAs an experienced 3D printing enthusiast, I'm always seeking ways to optimize my printer's performance and achieve the highest quality results. The Creality High Speed Nozzle Kit has emerged as an essential upgrade, delivering noticeable improvements in printing speed, consistency, and overall print quality.Significant Printing Speed EnhancementThe Creality High Speed Nozzle Kit lives up to its name, enabling significantly faster printing speeds without compromising print quality. This impressive improvement is attributed to the nozzles' optimized design and material composition, allowing for smoother filament flow and reduced resistance.Enhanced Print Consistency and QualityThe nozzles' precise manufacturing and consistent dimensions ensure enhanced print consistency, resulting in smooth surfaces, sharp details, and minimal artifacts. This level of precision is crucial for achieving professional-looking prints that meet the highest standards.Compatibility with Creality Sprite ExtruderThe Creality High Speed Nozzle Kit is specifically designed for the Creality Sprite Extruder system, ensuring seamless compatibility and effortless installation. The included nozzles are factory OEM parts, guaranteeing optimal performance and reliability.PID Tuning for Optimal ResultsWhile the nozzles work great without any modifications, it's recommended to perform PID tuning after installation. This process ensures that your printer's hotend temperature is accurately regulated, leading to further improvements in print quality and consistency.An Invaluable Upgrade for Enthusiasts and ProfessionalsThe Creality High Speed Nozzle Kit is an invaluable upgrade for both hobbyists and professionals seeking to elevate their 3D printing experience. Its noticeable improvement in printing speed, enhanced consistency, and professional-looking results make it a worthwhile investment for anyone serious about achieving the highest quality prints.Pros:Significant printing speed enhancement without compromising print qualityEnhanced print consistency and precision for smoother surfaces and sharper detailsCompatibility with Creality Sprite Extruder system for seamless installationFactory OEM parts for optimal performance and reliabilityRecommended PID tuning for further improvements in print qualityCons:Requires PID tuning after installationThe Creality High Speed Nozzle Kit is an exceptional upgrade that has significantly enhanced my 3D printing experience. Its ability to deliver faster printing speeds while maintaining exceptional print quality is truly remarkable. The nozzles' precise manufacturing, compatibility with the Creality Sprite Extruder system, and ease of installation make them an ideal choice for enthusiasts and professionals alike. I highly recommend this upgrade to anyone seeking to take their 3D printing to the next level.

Ottima adesione

F. · 27 April 2025

Provata ottima adesione