Description:
Review:
Get it, it's a good product!
Why did you pick this product vs others?:Works great!
Very Helpful
I've had a solar roof fan in place for several years but the motors burnout on those and replacing them is neither cheap nor easy to do. Rather than buy a new motor and work on installing it so it can burnout 3 years from now, I went with this gable fan.The fan with thermostat was important for me as I don't have to think about turning it on and off whenever I think it's needed. I've set the fan to 95 degrees or so in my attic and it's kicking on/off as it should. I will be seeing how long the thermostat lasts. I'm hopeful, it's years.As one reviewer noted, the dampers are a little light. He placed tire balancing weights on the outside of his as you can see in his photo. I went with far less weights, though I don't know how heavy his were to begin with. They certainly look the same. I used a total of 4 and it's plenty. The dampers/louvres move up 3/4 of the way when the fan is on. If they do get blown up too often my winds, I can always take a ladder up and add a couple more.The entire setup was less than two hours. You time may be less or more depending on accessibility into your attic (mine is a full walkup attic), outlet location (I had to install my own), and your tools and know-how for things like this.I saw a few comments that it's noisy. I think the sound it omits is what a fan should omit. I did take the added step of not merely screwing the fan to the opening but also framing the metal edges with wood strips to both hold it in place and dampen potential rattles or reverberations. It's been working three days now with no sound issues.One item that should be given with this system is screws with washers to hold the fan in place when bolting it. Or, at least, the screw openings should have been smaller. I only received small screws with plastic wraps for securing the fan electrical cord to the walls to prevent it from potentially moving up into the fan or catching someone as they move past it. Not a deal breaker as I have tons of screws, washers, etc. to use.Bottomline:The thermostat is helpful and the fan has enough draw with no vibrating sounds if installed securely. The damper/louvers could be heavier but that's easily resolved with weights/magnets. It's doing its job and I expect it to keep my HVAC system under a lot less stress. Attics get very hot.
Did not dissapoint
Build quality is on par. Worked as expected. Small thing to mention, I planned to place the controller in the garage and run an extension cord between then controller and fan so I could control the fan from garage instead of it just being temp controlledFor whatever reason it will not work with an extension cord between controller and fan. However you can use an extension cord between the wall and controller.
Works. Room for improvement
The fan does the job through brute force. It moves a lot of air, but much of it escapes out to the sides and blows back into the room. It is noisy. At low speeds, the louvers rattle and the motor emits a noticeable hum. Metal edges are sharp. Removing the blue plastic covering (not shown in illustrations) must be done carefully to avoid cuts.
Greenhouse Fan
The fan is great and works just as described. The dial thermostat control isn't exact but for my greenhouse it works great.
Visit the iLIVING Store
iLIVING 20" Wall Mounted Shutter Exhaust Fan, Automatic Shutter, with Thermostat and Variable Speed controller, 2.2A, 3368 CFM, 5000 SQF Coverage Area Silver (ILG8SF20V-ST)
BHD29024
Quantity:
Order today to get by
Free delivery on orders over BHD 20
'%3e%3crect%20x='0.599609'%20width='22.4'%20height='16'%20fill='%230A17A7'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M-0.426196%20-1.53223L9.1335%204.91587V-1.06506H14.4668V4.91648L24.0263%20-1.53147L25.2193%200.237148L17.6615%205.33494H23.0002V10.6683H17.6618L25.2187%2015.7655L24.0258%2017.5341L14.4668%2011.0865V17.0683H9.1335V11.0871L-0.425634%2017.5348L-1.61858%2015.7662L5.93947%2010.6683H0.600172V5.33494H5.93977L-1.61914%200.236387L-0.426196%20-1.53223Z'%20fill='white'/%3e%3cpath%20d='M15.5332%205.06615L25.6655%20-1.59961'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M16.6094%2010.9578L25.6924%2017.0801'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M7.00176%205.04727L-2.47266%20-1.33789'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M8.02936%2010.8842L-2.47266%2017.8486'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M0.599609%209.6H10.1996V16H13.3996V9.6H22.9996V6.4H13.3996V0H10.1996V6.4H0.599609V9.6Z'%20fill='%23E6273E'/%3e%3c/g%3e%3c/svg%3e)
Imported From: United Kingdom
At bolo.bh, we stand behind the authenticity and quality of every product we sell. We guarantee that all items offered on our website are 100% genuine, sourced directly from authorized distributors, trusted partners, or the original brands themselves.
We do not sell counterfeit, replica, or unauthorized goods. Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support . We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, including images, descriptions, and reviews, is provided by third-party vendors. bolo.bh is not responsible for any claims, promotions, or representations made within product content or images. For more accurate or detailed product information, please contact the manufacturer directly or reach out to Bolo Support.
Unless otherwise stated during checkout, all prices displayed on the product page include applicable taxes and import duties.
bolo.bh operates in accordance with the laws and regulations of Bahrain. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in Bahrain are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
More from this brand
Similar items from “Bathroom Fans”
Share with
Or share with link
https://www.bolo.bh/products/KO0OIL8IPAM
Visit the iLIVING Store
iLIVING 20" Wall Mounted Shutter Exhaust Fan, Automatic Shutter, with Thermostat and Variable Speed controller, 2.2A, 3368 CFM, 5000 SQF Coverage Area Silver (ILG8SF20V-ST)
BHD29024
Quantity:
Order today to get by
Free delivery on orders over BHD 20
Imported From: United Kingdom
At bolo.bh, we stand behind the authenticity and quality of every product we sell. We guarantee that all items offered on our website are 100% genuine, sourced directly from authorized distributors, trusted partners, or the original brands themselves.
We do not sell counterfeit, replica, or unauthorized goods. Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support . We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
All product information, including images, descriptions, and reviews, is provided by third-party vendors. bolo.bh is not responsible for any claims, promotions, or representations made within product content or images. For more accurate or detailed product information, please contact the manufacturer directly or reach out to Bolo Support.
Unless otherwise stated during checkout, all prices displayed on the product page include applicable taxes and import duties.
bolo.bh operates in accordance with the laws and regulations of Bahrain. Any items found to be restricted or prohibited for sale within the UAE will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in Bahrain are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Review:
Get it, it's a good product!
Why did you pick this product vs others?:Works great!
Very Helpful
I've had a solar roof fan in place for several years but the motors burnout on those and replacing them is neither cheap nor easy to do. Rather than buy a new motor and work on installing it so it can burnout 3 years from now, I went with this gable fan.The fan with thermostat was important for me as I don't have to think about turning it on and off whenever I think it's needed. I've set the fan to 95 degrees or so in my attic and it's kicking on/off as it should. I will be seeing how long the thermostat lasts. I'm hopeful, it's years.As one reviewer noted, the dampers are a little light. He placed tire balancing weights on the outside of his as you can see in his photo. I went with far less weights, though I don't know how heavy his were to begin with. They certainly look the same. I used a total of 4 and it's plenty. The dampers/louvres move up 3/4 of the way when the fan is on. If they do get blown up too often my winds, I can always take a ladder up and add a couple more.The entire setup was less than two hours. You time may be less or more depending on accessibility into your attic (mine is a full walkup attic), outlet location (I had to install my own), and your tools and know-how for things like this.I saw a few comments that it's noisy. I think the sound it omits is what a fan should omit. I did take the added step of not merely screwing the fan to the opening but also framing the metal edges with wood strips to both hold it in place and dampen potential rattles or reverberations. It's been working three days now with no sound issues.One item that should be given with this system is screws with washers to hold the fan in place when bolting it. Or, at least, the screw openings should have been smaller. I only received small screws with plastic wraps for securing the fan electrical cord to the walls to prevent it from potentially moving up into the fan or catching someone as they move past it. Not a deal breaker as I have tons of screws, washers, etc. to use.Bottomline:The thermostat is helpful and the fan has enough draw with no vibrating sounds if installed securely. The damper/louvers could be heavier but that's easily resolved with weights/magnets. It's doing its job and I expect it to keep my HVAC system under a lot less stress. Attics get very hot.
Did not dissapoint
Build quality is on par. Worked as expected. Small thing to mention, I planned to place the controller in the garage and run an extension cord between then controller and fan so I could control the fan from garage instead of it just being temp controlledFor whatever reason it will not work with an extension cord between controller and fan. However you can use an extension cord between the wall and controller.
Works. Room for improvement
The fan does the job through brute force. It moves a lot of air, but much of it escapes out to the sides and blows back into the room. It is noisy. At low speeds, the louvers rattle and the motor emits a noticeable hum. Metal edges are sharp. Removing the blue plastic covering (not shown in illustrations) must be done carefully to avoid cuts.
Greenhouse Fan
The fan is great and works just as described. The dial thermostat control isn't exact but for my greenhouse it works great.
More from this brand
Similar items from “Bathroom Fans”
Share with
Or share with link
https://www.bolo.bh/products/KO0OIL8IPAM