BeautyBooksElectronicsHome & KitchenSports & OutdoorsIndustrial & ScientificToys & Games
Deliver toBahrain
JCP uPVC Door Handle Pair, 122mm Screw Centres, 92 mm PZ Sprung Set, 220mm X 30mm Backplate, White

Description:

  • Important! check compatibility before ordering; 122 mm screw-fixing centres; 92 mm PZ spindle-to-cylinder measurement; fits solid doors 69 to 75 mm or composite doors 44 to 51 mm; trim supplied long screws for doors 52 to 68 mm; see measurement diagram
  • Non handed handles reversible for left or right opening doors; internal and external handle set with 220 mm × 30 mm × 12.5 mm backplates and two 8 mm spindles in 108 mm and 133 mm lengths
  • Fixings included; four M6 screws in 60 mm and 84 mm lengths; use two screws per side; for mid-range door thickness (52 to 68 mm) cut long screws to size
  • Enhanced security; reinforced bosses on backplate; inside-only screw fixing deters tampering; spring cassette sprung levers return handles to horizontal position
  • Corrosion-resistant aluminium construction; powder-coated white finish; tested to BS EN 1670 Grade 5 with 480 hour salt spray for lasting durability

    • BEFORE YOU ORDER, follow the compatibility check below:
    Please confirm your door’s measurements against our HOW TO MEASURE line-drawing images in the gallery. The screw-fixing centres must be 122 mm apart and the spindle-to-cylinder (PZ) centre must be 92 mm. This handle fits solid doors 69 mm to 75 mm thick and composite doors 44 mm to 51 mm thick. For doors 52 mm to 68 mm thick, trim the supplied long screws to suit.

    HOW TO MEASURE PZ CENTRE:
    Locate and mark the centre point of the spindle hole and the centre point of the cylinder hole on your door face. Place a steel ruler or tape measure with zero at the first mark and extend to the second; the distance must read 92 mm.

    HOW TO MEASURE SCREW CENTRES:
    Identify or mark the centre of the two screw-fixing holes. Position a steel ruler or tape measure so zero is at the first centre mark and measure straight to the second; the distance must read 122 mm.

    PRODUCT FEATURES:
    This modern white door handle set features ergonomically shaped aluminium levers with integrated spring cassettes that return each lever to the horizontal position after each use. The powder-coated finish meets BS EN 1670 Grade 5 corrosion resistance based on a 480 hour salt-spray test, making it suitable for both uPVC and composite doors.

    NON-HANDED DESIGN:
    The handles fully rotate 180 degrees to fit left- or right-opening doors without swapping parts.

    COMPLETE KIT:
    Includes two 8 mm spindles (108 mm and 133 mm) and four M6 screws (two 60 mm and two 84 mm) to suit door thicknesses of 44 mm to 51 mm and 69 mm to 75 mm. Trim the longer screws for doors 52 mm to 68 mm.

    INSTALLATION GUIDE:
    Only use a hand screwdriver; do not use power tools as they could distort the door profile.
    Position each backplate on the door, aligning screw-fixing holes at 122 mm centres.
    Select the appropriate screws from the included pack: use two 60 mm screws for doors 44 mm to 51 mm or two 84 mm screws for doors 69 mm to 75 mm; for doors 52 mm to 68 mm, use the longer screws and trim to fit.
    Slightly undo the cylinder retaining screw on the side of the door profile to aid alignment; retighten fully after handles are secured.
    Insert the 8 mm spindle through the lock mechanism and slide the handles onto the spindle.
    From inside the door, secure each handle with two M6 screws using a hand screwdriver.
    Trim any excess screw length if required for mid-range door thickness.

    IMPORTANT:
    Do not overtighten the handle screws as this will distort the door profile and prevent the spring cassette from working properly.
    Handles must be fully fitted to the door for the springs to operate correctly.

    DIMENSIONS:
    Screw-fixing centres – 122 mm
    PZ (spindle-to-cylinder) centre – 92 mm
    Backplate – 220 mm × 30 mm × 12.5 mm
    Spindle size – 8 mm

    CARE INSTRUCTIONS:
    Wipe clean with a soft cloth and mild detergent; do not use abrasive cleaners or solvents.

    Details:

    Visit the JCP Store

    JCP uPVC Door Handle Pair, 122mm Screw Centres, 92 mm PZ Sprung Set, 220mm X 30mm Backplate, White

    Product ID: KO0O5L9SY4J
    |

    Returns & Warranty policies

    Imported From: United Kingdom

    At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.

    Every product in the BOLO catalogue is sourced through our Verified Global Supply Network of verified sellers, authorized distributors or directly from the manufacturer.

    Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.

    If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.

    Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.

    While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.

    Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.

    BOLO operates in accordance with the laws and regulations of Bahrain. Any items found to be restricted or prohibited for sale within the Bahrain will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in Bahrain are listed on our website.

    All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.

    All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.

    Share with

    Or share with link

    https://www.bolo.bh/products/KO0O5L9SY4J

    Visit the JCP Store

    JCP uPVC Door Handle Pair, 122mm Screw Centres, 92 mm PZ Sprung Set, 220mm X 30mm Backplate, White

    Product ID: KO0O5L9SY4J
    JCP uPVC Door Handle Pair, 122mm Screw Centres, 92 mm PZ Sprung Set, 220mm X 30mm Backplate, White-0
    |

    Returns & Warranty policies

    Imported From: United Kingdom

    At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.

    Every product in the BOLO catalogue is sourced through our Verified Global Supply Network of verified sellers, authorized distributors or directly from the manufacturer.

    Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.

    If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.

    Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.

    While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.

    Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.

    BOLO operates in accordance with the laws and regulations of Bahrain. Any items found to be restricted or prohibited for sale within the Bahrain will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in Bahrain are listed on our website.

    All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.

    All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.

    Description:

  • Important! check compatibility before ordering; 122 mm screw-fixing centres; 92 mm PZ spindle-to-cylinder measurement; fits solid doors 69 to 75 mm or composite doors 44 to 51 mm; trim supplied long screws for doors 52 to 68 mm; see measurement diagram
  • Non handed handles reversible for left or right opening doors; internal and external handle set with 220 mm × 30 mm × 12.5 mm backplates and two 8 mm spindles in 108 mm and 133 mm lengths
  • Fixings included; four M6 screws in 60 mm and 84 mm lengths; use two screws per side; for mid-range door thickness (52 to 68 mm) cut long screws to size
  • Enhanced security; reinforced bosses on backplate; inside-only screw fixing deters tampering; spring cassette sprung levers return handles to horizontal position
  • Corrosion-resistant aluminium construction; powder-coated white finish; tested to BS EN 1670 Grade 5 with 480 hour salt spray for lasting durability

    • BEFORE YOU ORDER, follow the compatibility check below:
    Please confirm your door’s measurements against our HOW TO MEASURE line-drawing images in the gallery. The screw-fixing centres must be 122 mm apart and the spindle-to-cylinder (PZ) centre must be 92 mm. This handle fits solid doors 69 mm to 75 mm thick and composite doors 44 mm to 51 mm thick. For doors 52 mm to 68 mm thick, trim the supplied long screws to suit.

    HOW TO MEASURE PZ CENTRE:
    Locate and mark the centre point of the spindle hole and the centre point of the cylinder hole on your door face. Place a steel ruler or tape measure with zero at the first mark and extend to the second; the distance must read 92 mm.

    HOW TO MEASURE SCREW CENTRES:
    Identify or mark the centre of the two screw-fixing holes. Position a steel ruler or tape measure so zero is at the first centre mark and measure straight to the second; the distance must read 122 mm.

    PRODUCT FEATURES:
    This modern white door handle set features ergonomically shaped aluminium levers with integrated spring cassettes that return each lever to the horizontal position after each use. The powder-coated finish meets BS EN 1670 Grade 5 corrosion resistance based on a 480 hour salt-spray test, making it suitable for both uPVC and composite doors.

    NON-HANDED DESIGN:
    The handles fully rotate 180 degrees to fit left- or right-opening doors without swapping parts.

    COMPLETE KIT:
    Includes two 8 mm spindles (108 mm and 133 mm) and four M6 screws (two 60 mm and two 84 mm) to suit door thicknesses of 44 mm to 51 mm and 69 mm to 75 mm. Trim the longer screws for doors 52 mm to 68 mm.

    INSTALLATION GUIDE:
    Only use a hand screwdriver; do not use power tools as they could distort the door profile.
    Position each backplate on the door, aligning screw-fixing holes at 122 mm centres.
    Select the appropriate screws from the included pack: use two 60 mm screws for doors 44 mm to 51 mm or two 84 mm screws for doors 69 mm to 75 mm; for doors 52 mm to 68 mm, use the longer screws and trim to fit.
    Slightly undo the cylinder retaining screw on the side of the door profile to aid alignment; retighten fully after handles are secured.
    Insert the 8 mm spindle through the lock mechanism and slide the handles onto the spindle.
    From inside the door, secure each handle with two M6 screws using a hand screwdriver.
    Trim any excess screw length if required for mid-range door thickness.

    IMPORTANT:
    Do not overtighten the handle screws as this will distort the door profile and prevent the spring cassette from working properly.
    Handles must be fully fitted to the door for the springs to operate correctly.

    DIMENSIONS:
    Screw-fixing centres – 122 mm
    PZ (spindle-to-cylinder) centre – 92 mm
    Backplate – 220 mm × 30 mm × 12.5 mm
    Spindle size – 8 mm

    CARE INSTRUCTIONS:
    Wipe clean with a soft cloth and mild detergent; do not use abrasive cleaners or solvents.

    Details:

    Share with

    Or share with link

    https://www.bolo.bh/products/KO0O5L9SY4J