Deliver toBahrain
FPVtosky No Disassembly Tablet Holder for DJI Flip/Neo/Mini 2 SE/4K/ Air 3S/Mavic 3/Mini 3 Pro, 7-12 Inch Foldable iPad Mount Holder Pack of Lanyard and 2 Data Cables, DJI RC-N1/N2/N3 Accessories

Description:

  • 【No need to disassemble】After using this DJI Flip Neo Mini 4K Mini 2 se tablet stand, you don’t need to remove it, it can be directly folded on the remote control, and you don’t need to install it again next time. You can use it directly
  • 【Very stable】 Ingeniously designed, the tablet bracket is firmly fixed to the rear of the remote control lever with double screws, even a large ipad can be clamped very firmly, without worrying about the risk of the tablet falling
  • 【Comfortable oblique vision】 Observing tablet at an oblique angle could prevent reflections under sun
  • 【Anti-scratch & anti-slip】 Anti-scratch and anti-slip silicone pad is added to the contact with the plate to protect the plate from scratching
  • 【Wide compatibility】Compatible with almost all 7-12 inch tablet computers on the market (the width of the tablet is between 11cm-19cm), including iPad Mini (7.9"), iPad (9.7"), iPad Air (10.5"), iPad Pro ( 11"), Galaxy Note (10.1"), Galaxy Tab S7 (11"), etc. You don’t even need to take off your tablet case. Note: iPad Pro 12.9" is not supported!
  • 【Applicability】 for DJI Flip Neo, Mini 4K, Mini 4 Pro, Mini 3/ Mini 3 Pro, DJI Mavic 3, DJI Mini 2 SE, Mavic Air 2 and Mavic Air 2S
  • 【Packng list】 1* Tablet Holder 1* screwdriver 1* type C to Type C data cable(11.8") 1* type C to IOS data cable(11.8") 1* remote control lanyard. Note: please connect the Type-C interface with the data transmission logo to the remote control
  • 【Customer Service】FPVtosky provides a 1-year real-time warranty service for every Amazon order. Please just contact us via Amazon messages for any questions, and we will reply within 24 hours with a satisfactory solution

  • Details:

    FPVtosky No Disassembly Tablet Holder for DJI Flip/Neo/Mini 2 SE/4K/ Air 3S/Mavic 3/Mini 3 Pro, 7-12 Inch Foldable iPad Mount Holder Pack of Lanyard and 2 Data Cables, DJI RC-N1/N2/N3 Accessories

    Product ID: KO09U31X55L
    |

    Returns & Warranty policies

    Imported From: United Kingdom

    At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.

    Every product in the BOLO catalogue is sourced through our Verified Global Supply Network of verified sellers, authorized distributors or directly from the manufacturer.

    Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.

    If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.

    Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.

    While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.

    Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.

    BOLO operates in accordance with the laws and regulations of Bahrain. Any items found to be restricted or prohibited for sale within the Bahrain will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in Bahrain are listed on our website.

    All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.

    All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.

    FPVtosky No Disassembly Tablet Holder for DJI Flip/Neo/Mini 2 SE/4K/ Air 3S/Mavic 3/Mini 3 Pro, 7-12 Inch Foldable iPad Mount Holder Pack of Lanyard and 2 Data Cables, DJI RC-N1/N2/N3 Accessories

    Product ID: KO09U31X55L
    FPVtosky No Disassembly Tablet Holder for DJI Flip/Neo/Mini 2 SE/4K/ Air 3S/Mavic 3/Mini 3 Pro, 7-12 Inch Foldable iPad Mount Holder Pack of Lanyard and 2 Data Cables, DJI RC-N1/N2/N3 Accessories-0
    |

    Returns & Warranty policies

    Imported From: United Kingdom

    At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.

    Every product in the BOLO catalogue is sourced through our Verified Global Supply Network of verified sellers, authorized distributors or directly from the manufacturer.

    Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.

    If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.

    Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.

    While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.

    Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.

    BOLO operates in accordance with the laws and regulations of Bahrain. Any items found to be restricted or prohibited for sale within the Bahrain will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in Bahrain are listed on our website.

    All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.

    All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.

    Description:

  • 【No need to disassemble】After using this DJI Flip Neo Mini 4K Mini 2 se tablet stand, you don’t need to remove it, it can be directly folded on the remote control, and you don’t need to install it again next time. You can use it directly
  • 【Very stable】 Ingeniously designed, the tablet bracket is firmly fixed to the rear of the remote control lever with double screws, even a large ipad can be clamped very firmly, without worrying about the risk of the tablet falling
  • 【Comfortable oblique vision】 Observing tablet at an oblique angle could prevent reflections under sun
  • 【Anti-scratch & anti-slip】 Anti-scratch and anti-slip silicone pad is added to the contact with the plate to protect the plate from scratching
  • 【Wide compatibility】Compatible with almost all 7-12 inch tablet computers on the market (the width of the tablet is between 11cm-19cm), including iPad Mini (7.9"), iPad (9.7"), iPad Air (10.5"), iPad Pro ( 11"), Galaxy Note (10.1"), Galaxy Tab S7 (11"), etc. You don’t even need to take off your tablet case. Note: iPad Pro 12.9" is not supported!
  • 【Applicability】 for DJI Flip Neo, Mini 4K, Mini 4 Pro, Mini 3/ Mini 3 Pro, DJI Mavic 3, DJI Mini 2 SE, Mavic Air 2 and Mavic Air 2S
  • 【Packng list】 1* Tablet Holder 1* screwdriver 1* type C to Type C data cable(11.8") 1* type C to IOS data cable(11.8") 1* remote control lanyard. Note: please connect the Type-C interface with the data transmission logo to the remote control
  • 【Customer Service】FPVtosky provides a 1-year real-time warranty service for every Amazon order. Please just contact us via Amazon messages for any questions, and we will reply within 24 hours with a satisfactory solution

  • Details: