SEE THE DETAILED STEPS HERE!

1. Clean the area to be repaired, making sure there is no grease, impurities, moisture, etc. Cover the area around the damaged area with stickers. (It can prevent the area next to it from smudging, and the sticker can be peeled off after the repair is completed).

2. Extrude components A and B in a ratio of 1:1 to the stirring plate according to the needs, use a wooden stirring rod to mix evenly, and the final color is white. (A is the resin, which is white, and B is the hardener, which is off-white).

3. Use a stir stick to apply the mixture to the broken areas, use a spatula to smooth the surface. For penetrating holes, the bottom needs to be repaired before filling. For cracks, the surface impurities need to be cleaned up first, and then the surface should be smoothed repeatedly to promote the penetration of the repair paste.

4. Under normal circumstances, wait for 24 hours to cure. Uneven surface, low ambient temperature, high humidity or too thick application will take longer to cure. Once dry, you can use sandpaper to repair any excess marks on the surface.

PROBLEMS YOU MAY ENCOUNTER DURING USE:

1. If you accidentally touch the bathtub repair agent, it will not cause discomfort, but if the skin is sensitive or the hand has wounds, etc., it is recommended to wear the disposable plastic gloves we provide for operation.

2. After the product is mixed, it is a semi-fluid liquid, so when the vertical surface is repaired, it will flow to a certain extent due to the influence of gravity. Therefore, you need to be patient and apply multiple layers, so that a smooth surface can be formed. (30 minutes to dry slightly before applying a second coat!)

3. Don't worry about the small bumps after it is completely cured, use our sandpaper to smooth it. Note: The friction of the sandpaper will destroy the smooth surface after repair, please use the sandpaper as needed!

4. We also know that cracks and scratches are difficult to repair, because the surface area they can touch is really too small! Please be patient to clean up the impurities accumulated in the cracks, and then smooth the surface many times, which can help penetration, so as to get more Long lasting stickiness.

5. Put it back into service, at least 24 hours of drying time. When the surface is uneven, the ambient temperature is too low, the humidity is too high, and the repairs are repeated too many times, you need to spend a little more time waiting for it to dry.

6. If you encounter other problems, you can consult us for more detailed and professional maintenance advice.